Skip to content
ArchiWorking
ArchiWorking
Primary Navigation Menu
Menu
  • English
    • Français
    • English
    • Español
  • Home
  • Our articles
    • Finishes & materials
    • Renovation & design
    • Floor plans
    • Real estate
    • FAQ
    • Tips & tricks
    • Outdoor & garden

Kitchen Layout Before the Cabinet Maker

kitchen-6914223_1280

A kitchen can look balanced in a rendering and still be awkward every day. The test is not only whether the fronts align, but whether someone can unload the dishwasher, put dishes away, take a pan out and move past another person cooking.

Before choosing cabinet finishes or countertops, check those actions on a plan. The kitchen renovation checks before work starts provide the wider framework; this article focuses on the layout itself and its adjustment to the selected cabinet system.

Start with tasks, not a showroom arrangement

A functional kitchen connects washing, cooking, preparation, storage, food supplies and landing space. Those functions need sensible relationships without unnecessary journeys or conflicting doors.

The washing area generally brings together the sink, dishwasher, waste bin and some dish storage. Locating them together is only useful if an open dishwasher still allows access to the place where clean plates belong.

The cooking area includes the cooktop, oven, pans and utensils, along with somewhere appropriate to set things down. A visually neat row of tall cabinets can still be inconvenient if there is no usable landing surface near the oven.

Preparation needs a comfortable, well-lit stretch of countertop near the items used regularly. A collection of little fragments may add up to an impressive total length without providing a practical working area.

Choose storage around its contents. Heavy and frequently used objects should remain accessible. Wall cabinets are not the only answer: drawers, tall units, corner fittings and cabinet depths need to suit the things being stored.

These relationships also matter in an open-plan kitchen. The arrangement should work with the living and dining areas, views, daylight and routes through the larger room, not only with the kitchen elevations.

Test the plan with doors and drawers open

A generous floor area does not prevent a poor arrangement. The difficulty may be how the space is organized rather than how many square meters are available.

Run through a normal sequence: open the dishwasher, remove bowls, reach their storage, prepare a meal, use the oven and move while somebody else cooks. If each action requires closing another appliance or stepping around an avoidable obstacle, revise the plan.

Check the dishwasher, drawers, oven, refrigerator, corner cabinets and tall units together. Pay particular attention to sensitive simultaneous openings, not simply whether each item can open when everything else is shut.

A drawer may hit a neighboring handle. A cabinet door may narrow the only route. The refrigerator may be accessible on paper but awkward within the daily movement pattern. These are design problems, not decorative details.

Likewise, an island too close to the wall run can make unloading or passing difficult. Do not judge the gap only with all fronts closed. The real question is whether the room remains usable during the activities it is intended to support.

A checklist of common conflicts

Look for an overly tight island passage, a dishwasher remote from dish storage, an inconvenient corner and insufficient landing space near the oven or cooktop. Check the refrigerator’s position, colliding fronts and fragmented preparation surfaces.

Then check something less visible: whether the drawing uses the manufacturer’s actual dimensions. A convincing outline of generic rectangles does not establish that the chosen kitchen can be fitted that way.

The photograph shows a kitchen before renovation, when these questions can still be resolved. It is a reminder to review the existing room and the intended use before becoming attached to a finished appearance.

Three stages from intention to installation

First, establish a coherent layout: tasks, circulation, storage and the relationships between working zones. This initial drawing defines the direction of the project.

Second, select a kitchen model compatible with that direction. Different brands and ranges have different cabinet widths, depths, modules, corner solutions and technical limits. They are not interchangeable building blocks.

Third, adjust the drawing to the supplier’s real system and the actual site. Include installation allowances, filler strips, wall conditions, angles and finishing details before treating it as an execution plan.

Adapting the initial plan is normal. Its purpose is to preserve a functional arrangement in a buildable form, not to force a manufacturer to reproduce a theoretical composition using parts it does not supply.

See our projects in video

Real floor plans and renovations explained step by step on the ArchiWorking YouTube channel. Watch how spaces are reworked before the works begin.

Watch on YouTube

Keep the function while changing the modules

A useful initial plan should remain adaptable until the cabinet range is selected. Protect the intended sequence of use, but allow individual module sizes or details to change where necessary.

This distinction prevents a familiar trap: an attractive concept is treated as final, then cabinets are forced into too little space, fillers disappear, fronts rub or a proper end finish becomes impossible.

Kitchen before renovation, illustrating the layout, opening and technical checks required before work
Kitchen before renovation, illustrating the layout, opening and technical checks required before work

An intention drawing explains what is wanted. An installation drawing must show how it can actually be assembled with available products and appropriate reservations. Confusing those stages transfers unresolved decisions to the installer.

Review the adjustments against the tasks again. If changing a module solves a dimensional issue but makes the dishwasher block the dish cupboard, the plan has not yet reached a satisfactory resolution.

Fillers and tolerances are working space

Renovation walls are not always straight, corners are not always 90 degrees and dimensions can change slightly after building work. A line of cabinets drawn tightly between two nominal measurements leaves no room for those realities.

Filler strips absorb the difference between cabinetry and wall, accommodate an imperfect corner and keep a door or drawer clear of an adjacent surface. They also allow a cleaner finish to the run.

They are particularly important at the end of a run, beside side walls, in sensitive corners, around service columns or where a kitchen occupies an existing recess. A few centimeters of allowance can prevent substantial site adjustments.

Those allowances are not simply wasted storage. They are what allow the chosen doors, handles and drawers to operate properly in the actual building. Their precise size depends on the system and conditions, not a universal figure.

In older homes, include wall irregularities, floor levels, repaired areas, service entry points and fitting tolerances. A catalog composition cannot account for these automatically.

The plan should record the technical reserve rather than assume the installer will somehow find it later. The objective is a clean, usable installation, not the maximum number of cabinets squeezed into an outline.

When a layout becomes a relocation project

Changing a kitchen’s position in the home goes beyond rearranging cabinets. Water supply, drainage, electricity, dedicated circuits, the hood, service routes and the balance of the whole room need review.

The complete kitchen relocation case addresses that more specific situation: moving the kitchen to gain another room. Its accompanying video complements this article but does not replace the general layout method.

Keep the distinction clear. Here the question is how to organize an effective kitchen. In the related case, the wider challenge is changing how the home is used by transferring the kitchen elsewhere.

A structural column, load-bearing wall or open living-room arrangement also belongs in the brief from the beginning. Such constraints should not be ignored while a preferred island shape is developed.

The open kitchen with a structural column integrated into the island shows how an existing technical constraint can support the design. It is an example of working with the building, not an invitation to remove structural elements.

Final review before approval

Review the kitchen twice: once as an overall drawing of runs, island, tall storage and service zones, and again as a sequence of everyday gestures. Both views are necessary.

Confirm that the layout still works with real manufacturer dimensions, fronts and hardware. Check filler strips, critical corners, installation reserves and the effects of the site work on final measurements.

Then revisit the actions: opening, passing, putting down, washing, preparing, cooking and putting away. A kitchen that survives those simple tests is more reliable than one approved only from a closed-front perspective.

Frequently asked questions

Should there be a plan before visiting a kitchen supplier?

Yes. It helps define use, circulation and the general logic. It should then be adapted to the selected range, since cabinet sizes and technical solutions vary between suppliers.

How much passage space is enough?

It depends on the arrangement. Test the required openings, dishwasher use, working positions and movement by more than one person. Being able to squeeze past closed units is not the same as being able to use the kitchen comfortably.

Why are filler strips especially important in renovation?

They reconcile cabinetry with imperfect walls and corners and help keep fronts clear. Leaving them out may make a nominally full run impossible to install or operate properly.

What should be checked before choosing finishes?

The working zones, simultaneous openings, storage locations, landing surfaces, actual cabinet dimensions and technical allowances. Appearance matters, but it should develop on a functional foundation.

2023-09-06
In: Renovation & design
Tagged: Apartment, Architect tips, House and villa, Kitchen, Living room
Previous Post: Custom Headboards: Technical Lining Approach
Next Post: Blue Decoration in Interior Architecture
  • Mentions légales
  • Politique de confidentialité
  • Consultation avec un architecte d’intérieur en visio

ArchiWorking explore l’architecture d’intérieur, l’aménagement intérieur et extérieur, les travaux de rénovation, ainsi que l’immobilier résidentiel et patrimonial. À partir de projets réels, nos articles abordent les choix décoratifs et d’aménagement, les aspects techniques, les démarches administratives, les coûts des travaux et la valorisation du patrimoine.

Ce site prolonge notre blog historique, Pétale de Carreaux, et s’appuie sur ArchiWorking, un média spécialisé en architecture d’intérieur et en aménagement extérieur. Sur la chaîne YouTube, Clara AJMAR, architecte d’intérieur et paysagiste DPLG, et Mathieu REY, architecte d’intérieur et coordinateur de projet, présentent des projets réels, des plans commentés et des études de cas en vidéo. Ils y partagent leurs conseils et leur méthode. Ils accompagnent également des projets au moyen d’études d’aménagement et de conception intérieure ou extérieure proposées en ligne depuis ce site.

Archiworking est une marque déposée sous le n° 5268747. Les textes, photographies, vidéos et éléments graphiques originaux publiés sur ce site sont protégés par le droit d’auteur.

Catégories

Articles récents

  • Turning an 84 m² T2 into a T3 on Plan
  • Fitting Six Functions into an 84 m² T2
  • How to Fit an Entryway, Kitchen, and Laundry Pantry Into 160 Sq Ft
  • How to Remodel a 59 m² One-Bedroom Apartment to Enlarge the Bedroom and Add a Walk-In Closet
  • Creating a Primary Suite: Expand or Reconfigure? 2 Floor Plans Compared with a Clear Method

Catégories

  • FAQ renovation & design
  • Finishes & materials
  • Floor plan design
  • Outdoor & garden design
  • Real estate
  • Renovation & design
  • Tips & tricks

Contact par mail :
info@archiworking.com

Contact par formulaire :
Formulaire de contact

  • Mentions légales
  • Politique de confidentialité
  • Consultation avec un architecte d’intérieur en visio

Nos réseaux / Follow Us

All rights reserved ©

X
Besoin d’un avis sur votre aménagement ?
👉 Échanger sur votre projet
Scroll Up