Skip to content
ArchiWorking
ArchiWorking
Primary Navigation Menu
Menu
  • English
    • Français
    • English
    • Español
  • Home
  • Our articles
    • Finishes & materials
    • Renovation & design
    • Floor plans
    • Real estate
    • FAQ
    • Tips & tricks
    • Outdoor & garden

4 Interior Design Mistakes Avoided When Merging Two Units into One House: A Real Example

dessin projet aménagement

Merging two homes into one house is a project where the same mistakes keep coming back. Not for lack of budget or goodwill, but for lack of method upfront. On this 145 m² (about 1,560 sq ft) ground floor, four classic mistakes were avoided thanks to design work done before construction. That is exactly what the full article details: a 145 m² house plan merging two units into a family home, the method before the works.

By Clara Ajmar, qualified interior architect and DPLG landscape architect. Updated April 2026.

Four mistakes avoided on this project. Each one had a simple solution.

This video presents the project in detail, from reading the existing plan to the final layout choices.

Mistake 1: poor circulation that makes the plan unreadable

This is the most frequent and most structural mistake. When two homes are merged, you often inherit two different circulation logics that coexist without really connecting. The result is a plan where you do not know which way to go, rooms are badly served, the kitchen is far from the entrance or the living room is cut off from the garden. On this project, everything was reorganized around one clear main entrance, with simple, fluid and logical access to each space from that central point. Circulation is no longer endured, it reads at a glance.

The rule to avoid this mistake: draw circulation first, before placing rooms. Entrance first, then the movement axes, then the rooms around them. It is the opposite of what most owners do when they start by placing the kitchen or living room and then discover they can no longer move around properly.

Pro tip: before placing anything on a plan, draw the circulation axes from the entrance to each room. If an axis crosses a main living area or forces you through one room to reach another, the plan does not work yet. This ten-minute test reveals problems before construction.

Mistake 2: poor handling of daylight

The second classic mistake is adding new partitions that cut off daylight without anticipating the impact. On this project, the position of the existing windows, the opening of the central load-bearing wall and a glass partition between the study and the main hallway kept real brightness in every space, including those that could have turned dark after the reorganization.

The new partitions, laundry room, guest toilet and study, were placed in the least lit areas of the plan. The main living spaces, kitchen, living room and dining room, kept the best orientations. This hierarchy of light is a fundamental of a good plan: service functions accept secondary light, while living spaces need the best exposure.

See our projects in video

Real floor plans and renovations explained step by step on the ArchiWorking YouTube channel. Watch how spaces are reworked before the works begin.

Watch on YouTube

Mistake 3: a poorly planned structural opening

Opening a load-bearing wall is often the most visible move when merging homes, and one of the riskiest when it is badly prepared. The classic mistake is opening without a structural study, or opening where it looks easiest without checking that it is technically sound. On this project, the 6-meter (about 20 ft) opening was studied upfront by a structural engineering firm. The support post is well placed and integrated into the kitchen composition, and the spans were worked out in line with the prior technical approval.

This point is non-negotiable. Opening a load-bearing wall without a structural engineering study is a major structural risk. Any interior architect requires this check before such works, whatever the urgency or budget. To go further on what to check before starting a renovation, see the 9 essential checks before launching a renovation.

Mistake 4: poorly distributed services

When two homes are merged, you also inherit two separate sets of services: plumbing, electrical and ventilation. The temptation is to keep them as they are and adapt them to the new plan. That is often a costly mistake: services scattered across the ground floor mean unnecessary pipe runs, higher labor costs and more complex maintenance.

On this project, everything was centralized. The service functions, laundry room, guest toilet and kitchen, were grouped close together to minimize service runs, optimize installation costs and simplify future maintenance. This also freed savings to invest in more visible items with a bigger impact on daily comfort.

These four avoided mistakes are not the result of an exceptional budget. They come from design work done before construction, on paper, with method. That is where the quality of a renovation is won or lost.

To see more renovation and home transformation projects, find our sites on the ArchiWorking channel.

Why is circulation the first thing to work on when merging two homes?

Because it drives everything else. A plan with poor circulation makes every space hard to use day to day, even if each room is well sized on its own. The entrance and movement axes are drawn first, and the rooms are organized around them.

How can daylight be kept when adding new partitions?

By placing new partitions in the least lit areas of the plan, using glass partitions between service spaces and hallways, and keeping the best orientations for living spaces. This hierarchy of light is planned on paper, not after the partitions are built.

Why is a structural engineer needed to open a load-bearing wall?

Because the opening affects the structural stability of the building. The engineer calculates load transfers, sizes the steel or support beam and validates the posts needed. Without this study, the opening is a risk no serious professional can endorse.

How are services centralized when merging two homes?

By grouping service functions, laundry, toilet and kitchen, close together from the design stage. This reduces pipe runs and installation costs and simplifies future maintenance. It is a planning decision, not a site decision.

2026-04-11
In: FAQ renovation & design, Real estate
Tagged: Architect tips, Before and after
Previous Post: Joining Two Homes into One 145 m² House
Next Post: Moving a Kitchen to Gain a Room: Three Constraints
  • Mentions légales
  • Politique de confidentialité
  • Consultation avec un architecte d’intérieur en visio

ArchiWorking explore l’architecture d’intérieur, l’aménagement intérieur et extérieur, les travaux de rénovation, ainsi que l’immobilier résidentiel et patrimonial. À partir de projets réels, nos articles abordent les choix décoratifs et d’aménagement, les aspects techniques, les démarches administratives, les coûts des travaux et la valorisation du patrimoine.

Ce site prolonge notre blog historique, Pétale de Carreaux, et s’appuie sur ArchiWorking, un média spécialisé en architecture d’intérieur et en aménagement extérieur. Sur la chaîne YouTube, Clara AJMAR, architecte d’intérieur et paysagiste DPLG, et Mathieu REY, architecte d’intérieur et coordinateur de projet, présentent des projets réels, des plans commentés et des études de cas en vidéo. Ils y partagent leurs conseils et leur méthode. Ils accompagnent également des projets au moyen d’études d’aménagement et de conception intérieure ou extérieure proposées en ligne depuis ce site.

Archiworking est une marque déposée sous le n° 5268747. Les textes, photographies, vidéos et éléments graphiques originaux publiés sur ce site sont protégés par le droit d’auteur.

Catégories

Articles récents

  • Turning an 84 m² T2 into a T3 on Plan
  • Fitting Six Functions into an 84 m² T2
  • How to Fit an Entryway, Kitchen, and Laundry Pantry Into 160 Sq Ft
  • How to Remodel a 59 m² One-Bedroom Apartment to Enlarge the Bedroom and Add a Walk-In Closet
  • Creating a Primary Suite: Expand or Reconfigure? 2 Floor Plans Compared with a Clear Method

Catégories

  • FAQ renovation & design
  • Finishes & materials
  • Floor plan design
  • Outdoor & garden design
  • Real estate
  • Renovation & design
  • Tips & tricks

Contact par mail :
info@archiworking.com

Contact par formulaire :
Formulaire de contact

  • Mentions légales
  • Politique de confidentialité
  • Consultation avec un architecte d’intérieur en visio

Nos réseaux / Follow Us

All rights reserved ©

X
Besoin d’un avis sur votre aménagement ?
👉 Échanger sur votre projet
Scroll Up